Home | Belt Driven Generators | Hydraulic Generators | Firepower | Welders | Downloads | tel: 845.469.9151

 

Fabco Power

Setting the Standard in Mobile Power


HYDRAULIC GENERATOR FOR SCISSOR LIFTS
HYDRO 400CXG
Also available in 2kw, 3kw, 3.5kw
HYDRAULIC DRIVEN A.C. GENERATOR
2KW, 3KW, 3.5KW , 4KW Hydraulic Driven AC Generator for Scissor Lifts



 Scissor Lifts


Motors are 97% Efficient
No Oil Cooler SAVE Hundreds of $$$'s
All our units have two roller bearings. We don't use motor shaft as a bearing
Standard GFI included
Lightweight, Only 40 lbs.
Compact Size Requires One Third the Space of an Engine Generator Set
Generator is Environmentally Clean and Non-Polluting
Complete Unit is Maintenance Free
Generator is Completely Brushless (no AC or DC brushes)
Automatic Current Overload Protection Device
Easily Reconnectable for 120/240 volts
Regulation +/-3% (automatic, no voltage regulator) Excellent Surge Capacity
Hydraulic Motor Requires only 4.5GPM for 4000 Watt Output
Pressure Compensating Flow Control 		non-polluting generator logo
FABCO POWER = CLEAN POWER
Fabco Hydraulic generators are
enviromentally clean, and non-polluting.
Fabco generators do not require a second engine and Save You Money.
CLICK HERE


Fabco is a global supplier of mobile power. Our generators have been used by the U.S. Military in both war and peace time for the past 50 years. It is our experience in building generators that meet military specifications that sets Fabco apart from all others. Our commercial units are built with those same standards.



The Hydro 400CX-4.5-G is made from high-grade aluminum to ensure longevity under the most stressful conditions. This unit was designed to withstand the rigors of heavy use and inclement weather.

MODEL -
 HYDRO-400CX-4.5-G
VOLTS -
 120/240
AMPS -
 34/17
WATTS -
 4000 CONTINUOUS
PHASE -
 SINGLE
RATED AMP TEMP. -
 40C
GPM -
 4.5 (available in 6 & 8)
WEIGHT -
 40 LBS.
MOTOR -
 GEAR TYPE
DIMENSIONS -
 16" L x 8" W x 7.5" H
Will Operate on any 2000 to 2500 PSI Open Circuit or Closed Circuit Loop System
Note: All ratings taken at 100 oil temperature (Do not exceed 170)




Optional Control Panel Control Panel

Volt Meter
120V. Duplex Receptacle
Waterproof Cover
Automatic Overload Protection Device


Home  Who is Fabco
Belt Driven Generators  Hydraulic Driven Generators
E-mail




Fabco Power - Kings Highway - P.O. Box 582 - Chester, NY 10918
tel: 845-469-9151 - fax: 845-469-7871